Rust Remover

2018/08/23

Iron and steel descaling agent is a highly effective descaling and descaling agent. It has the advantages of long service life, slight oil removal, no ash hanging, low corrosion, strong hydrophilicity, etc. It can be used in different fields and is suitable for oxidation. Blackening, phosphating, spraying and other fields. High surface finish, low cost, no energy consumption, no pollution, easy operation, non-combustible and non-explosive, safe transportation, etc. It is widely used in iron and steel hardware, molds, etc. Final treatment of rust on the steel surface.

I. Process range:
Appearance: light yellow liquid
Proportion: Stock solution or 1: 0.5 (up to 1: 4 according to the degree of rust)
Working temperature: -40 ° C
Tank liquid pH: 1-3
Time: 1-15min
Using method: dipping, spraying
II. Tank liquid management
A, LP-158 steel rust remover, the higher the concentration, the stronger the rust removal power, but the shorter the life is the opposite. When the rust removal ability decreases, you can add 10% of the volume of the bath volume of the original liquid for maintenance, and so on. No need to add tap water.
B. When adding a new rust remover, the effect is not obvious, it is recommended to change the tank.
C, solution and rust remover should be sealed when not in use.
III.Packing Specifications
25kg / plastic drum