中文/ENGLISH
Customer Hotline

86-13343021126   86-15831539932

Product

Product

Address:

Tianwei West Road, Baoding City, Hebei Province

Mobile:

+86 13343021126
Product

Current position:Index-Product-LP-G718 Plastic removal agent

LP-G718 Plastic removal agent

2018/07/06

 "Lanpa" brand water-based quenching liquid is a light yellow translucent liquid, made with various additives such as rust prevention, anticorrosion, etc., and has reverse solubility to water. It overcomes the shortcomings of fast water cooling speed, easy to crack the workpiece, slow oil cooling speed, poor quenching effect and flammability.
  Main Specifications:
Project indicators
Appearance light yellow translucent viscous liquid
Density (20 ℃) kg / L1.1
Kinematic viscosity (40 ° C) mm2 / s260
PH value 8.0
Main performance:
The depth of the hardened layer and the quenched layer are uniform, reducing the quenching deformation of the workpiece, and avoiding the danger of cracking and soft spots;
Good stability, the quenching cooling rate changes little with time;
The concentration is easy to measure and control. Adjust the concentration to get the cooling rate between water and oil;
Excellent anti-rust and anti-corrosion performance for workpieces, quenching tanks and cooling cycle series;
Long-term use without corruption, odor, and small amount of carry-out;
Low use cost and good comprehensive economy;
Use:
Can be used for hardening of carbon steel, low alloy steel, carburizing steel, spring steel, bearing steel, etc.
Suitable for open-type quenching tanks, continuous furnaces, and multi-purpose furnaces outside quenching tanks for overall immersion quenching and induction heating quenching.
  Precautions:
1. Prevent dust, oil and other impurities from being mixed into the quenching liquid, so as not to affect the cooling performance of the quenching agent and the deterioration of the quenching liquid.
2. Precipitate the quenching liquid every six months to one year and keep it clean.
3. Proper stirring can extend the service life, usually using a pump or propeller. When stirring with a pump, the flow rate of the solution is preferably less than one meter per second, to avoid air being entangled in the liquid; it is better to use a propeller to rotate at a speed of 100-450 revolutions per minute.
4. This product is not frozen, it is recommended to roll it in winter to make it evenly mixed.

Home About Us Product Hot-sale Effect News Contact message

All rights reserved:Baoding Lanpa Metal Surface Finishing Co.,Ltd Phone:+86 13343021126

Address:Tianwei West Road, Baoding City, Hebei Province ICP备案编号:冀ICP备09034870号-2