LP-H630Emulsified oil

2018/07/06

Advanced microemulsion grinding fluid is the latest generation of metalworking lubrication and cooling medium. It has the advantages of both emulsions and synthetic cutting fluids. And it has overcome its own shortcomings, so it is a long-life cutting fluid with excellent comprehensive performance.
The microemulsion grinding fluid has the following characteristics:
A. Lubricity characteristics: It exceeds ordinary emulsifier, greatly exceeds synthetic cutting fluid, and its PH value is more than doubled than synthetic cutting fluid. Experiments show that it can reduce the surface roughness of the workpiece by 1-2 levels, and reduce the wear of props and grinding wheels by more than 30%.
B. It can keep the guide rail of the machine tool flexible and overcomes a major disadvantage of synthetic cutting fluid.
C. Because the liquid is transparent or translucent, it is convenient for the operator to directly observe the surface state.
D. It has good chemical stability, and is not easy to deteriorate. It is 2-3 times the service life of the emulsion.
This product refers to the national technical standard of << GB / T6114 Synthetic Cutting Fluid >>, the technical indicators are as follows
Project
  Quality Index
  experiment method
  Exterior
Red brown to brown oily liquid
Visual inspection
Transparency
Transparent or translucent
According to GB / T6144
PH value
8-10.0
PH test paper
Defoaming property (ml / 10min)
≤2
According to GB / T6144
Corrosion test (55 ° C full immersion)
First class cast iron
48hA
According to GB / T6144
Copper T3
8hA
Hard aluminum L / 12 antirust test
(35 ℃ .RH> 95%)
8hA
Cast cast iron
48hA
Cast Iron Laminate
8hA
Use matters:
1. The concentration of this grinding fluid is generally about 1:15. It can be adjusted appropriately according to the processed raw materials and processing methods. Dilute with tap water when preparing.
2. In the process of use, when the solution needs to be replenished due to the decrease of solution, it should be prepared according to the original concentration and added.
3. Before using this product, the cutting fluid used before should be drained, the fuel tank and pipeline should be thoroughly cleaned, and rinsed with the dilute liquid of the grinding fluid, and then refilled with the prepared working fluid.
4. Not easy to mix with other coolants and oils.
5. The grinding fluid is suitable for the processing of cast iron, carbon steel, alloy steel, copper alloy and other materials. It is especially suitable for applications on imported machine tools, CNC machine tools, and machining centers.
出厂 The grinding fluid is packed in plastic drums or iron drums before delivery.