Water-soluble steel sealant

2018/07/06

One product use
It is mainly used for anti-rust, short-term anti-rust and storage anti-rust between ferrous metal and alloy steel product components and materials. It is especially suitable for places with long anti-rust period, no residue, no greasy, and no dust.
Two performance characteristics
 ● Free of toxic and harmful substances such as sodium nitrite;
● Strong rust prevention performance, with the dual effect of rust prevention and passivation, which can replace iron and steel passivation agents and play a passivation role; it can also replace ordinary antirust oils and play a role of oil film sealing and rust prevention
● This product completely eliminates the problem of floating ash residue in traditional water-based rust prevention, and eliminates the greasy ash problem of traditional anti-rust oil;
● This product does not contain mineral oil, which can eliminate the cleaning process;
● Use with water to form a stable and transparent anti-rust liquid with water. The workpiece can be operated with water, which is convenient to use;
● Different dilution ratios can be selected according to the length of the rust prevention period;
● The workpiece treated by this agent can maintain the original color of metal.
San physical and chemical indicators

project	index
Exterior	Light yellow transparent liquid
PH	>9
proportion	＞1
odor	Slightly pleasant smell
Rust resistance (35 ° C high humidity)	More than 24 hours
Sodium nitrite poison	no
Solubility	Water soluble

Four methods of use
1. Add water according to the ratio of 5% -10%, and stir well to form a transparent solution, which can be dip coating, spray coating, or brush coating. The higher the concentration of this product, the better the effect;
2. After the anti-rust treatment, the workpiece must be air-dried, air-dried or low-temperature dried before entering the next process or packaging.
3. Recommended typical process:
Workpiece——degreasing and rust removal—washing—rust inhibitor treatment—drying
5 Notes
1. When using, ensure that the original liquid and water are mixed and stirred evenly to increase the performance of this product;
2. After the rust-proof and drying, the workpiece should not be in direct contact with water as much as possible during storage; it is recommended to store it in a cool, dry place and sealed;
3. It is forbidden to mix in metal debris, wire wool and other debris;
4. It is forbidden to eat;