Antifog

2018/08/23

LP-G713 Hydrochloric acid degreasing and fog suppressant
Acid mist inhibitor is used in electroplating, electrostatic spraying, spray painting and other industries for acid cleaning and rust removal. The use of hydrochloric acid for rust removal results in a larger acid mist, which pollutes the environment and causes greater damage to equipment and operators. Pickling tanks Adding a small amount of hydrochloric acid anti-fog and corrosion inhibitor can effectively alleviate the inhibition of acid mist and prevent excessive corrosion of the material by hydrochloric acid.

I. Function:

 It is used to suppress the volatilization of hydrochloric acid acid mist, and at the same time promote the removal of various oil stains in the process of hydrochloric acid pickling metal, slow or inhibit the corrosion of hydrochloric acid on metals, and have good synergistic effect with hydrochloric acid, suitable for various temperatures Of hydrochloric acid.
Features: It is a compound of high-efficiency smoke inhibitor and acid mist absorber, which has stable performance, simple operation, small dosage, high efficiency, low cost, non-toxic and odorless, and can make the volatilization of hydrogen chloride gas less than the national allowance. The concentration HCL is less than 1mg / m3, which prevents hydrogen embrittlement and over-corrosion on the metal surface, slows down the loss of iron and the consumption of acid, improves the working environment and is safe to use.

III. Physical and chemical indicators;

1: Status: liquid, neutral, slightly alkaline, non-corrosive, non-combustible and non-explosive
2: Condition: liquid, non-combustible, toxic, odor: non-toxic, odorless